风洞现场电磁干扰测量研究

根据风洞现场测控系统的特点,对风洞现场的电磁干扰测量方法和技术进行研究,并在风洞中进行试验,得到了相关的试验数据．通过对数据的分析可以得出：影响风洞现场测控系统的电磁干扰源主要是大功率变频装置,耦合途径为空间辐射和电源线传导．     

Ricochet quantification using a multiple sensor approach

This study investigates the ricochet behaviour of three different small-arms projectile types using a novel ricochet measuring device.The results can be used to estimate the danger potential of ricochets on shooting ranges.A ricochet is the change of direction and velocity of a projectile after impacting an oblique surface.This impact produces strong vibrations on a rigid plate.During this impact,flexural waves travel radially outwards from the point of impact.These waves are used to determine the properties of the impactor with accelerometers situated on the target surface.With the use of two measurement plates,one can produce a ricochet and detect the velocity at the same time.Accelerometers are suitable for accurate momentum measurements of single impacts.However,depending upon strike velocity and the impact angle,a ricochet can separate in multiple fragments after being deflected.From the operational safety perspective,these fragments need to be detected,as well.The approach of a coupled sensor concept was chosen to solve this problem.Thermographic sensors were additionally used to visualise the heat which is produced after pene-trating a rubber layer pasted in front of the steel target plate.With this approach one was able to detect the position of impact.The investigations showed that the measurement system performance is better with a multiple sensor design,which includes accelerometers for the velocity,impact strength and partly the position measurement,while the thermographic sensor was used for the position measurement and partly the momentum measurement.The investigated ammunition showed plausible fragmentation behaviour,and the results can already be used to estimate the danger potential of different ammunition types.Frangible projectiles fragment to small particles already after being deflected under a small angle.However,Full Metal Jacket projectiles with or without a steel core do not fragment under angles which are less than 5°.The objective of the paper is to demonstrate the possibility of measuring the complex ricochet me-chanics of small projectiles using standard accelerometers with the adequate signal processing approach.This measuring system is supported by an off the shelf thermographic camera.     

A novel launch dynamics measurement system for multiple launch rocket system and comparative analysis with numerical simulations

In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket's departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.     

A critical look at the U.S. deceased‐donor organ procurement and utilization system

The U.S. system for procuring and utilizing deceased‐donor organs for transplantation has been studied and written about in many articles. The purpose of this paper is to examine the interactions between the elements that comprise this system, and point out improvement opportunities that may be affected through operations research/management techniques. The authors demonstrate the need for developing data‐driven and analytic tools. In fact, data is used to generate hypotheses and support claims throughout the paper. The paper also points out the need to fully leverage data that is available to researchers, and to seek data that is currently not deposited in a centralized archive.     

基于概率推断网的水雷战专家系统

针对反水雷作战决策的需要,运用贝叶斯推理、模糊逻辑以及可信度不确定推理方法,设计了一个基于概率推断网的水雷战专家系统.利用该系统可得出两种结论:一是利用计算概率的方法得出的结论,二是利用计算可信因子方法得出的结论,两种结论呈现定量和定性的互补关系.可较好地为反水雷作战指挥员提供辅助决策,以减少舰船遭毁伤的概率.     

SEA的侦察与监测系统效能分析

侦察与监测系统已成为现代C3I系统的重要组成部分,其效能评估既有C3I系统的一般性又有自身的特殊性。首先在一般系统效能含义上定义了侦察与监测系统的系统效能,比较了几种典型的C3I系统评估方法。在此基础上,将SEA方法应用于分析侦察与监测系统效能,并将情报信息量作为效能度量的指标。最后给出了分析计算过程和仿真结果。     

双声纳基阵二维目标联合测向交叉定位算法精度分析

主要对双声纳基阵二维目标联合测向交叉定位算法及精度进行了分析，给出了系统具体的定位公式和误差计算公式，并针对不同基线和不同基线误差、方位误差下目标GDOP的分布情况进行了仿真分析。仿真结果表明，定位误差随基线长度的增加而减小，随基线和方位误差的增大而增大，当基线增大到一定长度时．定位误差最终趋向稳定，达到最小。     

基于红外辐射计的物体光谱发射率测量方法

发射率是测量红外辐射特性中的重要参数,直接影响测量的精度。在传统的能量法测发射率的基础上进行改进,利用红外辐射计MR170测量目标的光谱辐射亮度并在同一温度相同波段下建立一标准黑体模型,对目标光谱发射率进行求解。实验验证该方法可以获得满意的测量结果。对实验求取的光谱发射率进行误差分析,结果显示误差小于3%。     

基于金属膜电阻的大功率低电感负载

利用金属膜电阻设计并制作了用于陡化前沿Marx发生器调试的大功率低电感负载.其阻值约为90Ω,电感约为55nH,基本不具备分散电容.该负载采用线性渐变的圆锥外型结构,有利于减小信号在负载上的反射,配合电容分压器使用能够很好地完成对前沿约为几ns的快前沿高压脉冲的测量.理论估算了该负载的功率容量,并利用PSpice软件模拟了对其进行脉冲方波加载的情况.该负载用于调试陡化前沿的Marx发生器的实验中,获得了幅值约210kV,脉宽近40ns,前沿为5ns的快前沿高压脉冲.多次实验结果表明该负载性能稳定,适用于陡化前沿Marx发生器的调试工作.     

铅酸蓄电池电解液密度测量装置的研究

研究了基于谐振原理的振动管式电解液密度测量装王.在阐述了其工作原理的基础上,给出了测量装王的两种结构框图(固定式和便携式)及装置的测量特点.试验表明,该电解液密度测量装王具有较高测量精度(误差在3‰ g/cm3以内).